FREE SHIPPING on every walk-in we quote  ·  Same-day quote
R-454A · Low Temperature (Freezer)

1-1/3 HP R-454A walk-in freezer refrigeration system

Updated

No standard freezer package uses 1 1/3 HP. We pick it at quote when a small custom freezer needs about 3,800 BTU/h at 95°F and -20°F suction: more than a 1 HP gives, less than a 1 1/2 HP. This class has 6 current R-454A condensing units at 1-1/3 HP, rated 3,820 BTU/h at 95°F ambient, with the 6 unit coolers matched to that capacity, for a walk-in freezer holding 0°F to -10°F.

Outdoor remote refrigeration condensing unit of the type supplied with a 1-1/3 HP walk-in freezer system
1-1/3
Horsepower
3,820
BTU/h at 95°F ambient
6
Condensing units
6
Matched evaporators
6 models

1-1/3 HP R-454A condensing units

R-454A is an A2L refrigerant: lower GWP, mildly flammable, installed to the manufacturer’s A2L requirements. Compare R-448A and R-454A.

1-1/3 HP R-454A Low Temperature (Freezer) condensing units, 6 models
ModelSeriesSiting CompressorBTU/h @ 90°F BTU/h @ 95°FElectrical D × W × HWeight
WBON130L4ADA Next-Gen Mini-Con Indoor / Outdoor Scroll · Non-Flooded 3,980 3,820 208-230/1/60 · 1-ph 28-1/4 × 27-7/8 × 18-3/4″ 195 lb
WBON130L4AEA Next-Gen Mini-Con Indoor / Outdoor Scroll · Non-Flooded 3,980 3,820 208-230/3/60 · 3-ph 28-1/4 × 27-7/8 × 18-3/4″ 195 lb
WFON130L4ADA Next-Gen Mini-Con Outdoor Scroll · Flooded 3,980 3,820 208-230/1/60 · 1-ph 28-1/4 × 27-7/8 × 18-3/4″ 195 lb
WFON130L4ADANT Next-Gen Mini-Con Outdoor Scroll · Flooded 3,980 3,820 208-230/1/60 · 1-ph 28-1/4 × 27-7/8 × 18-3/4″ 195 lb
WFON130L4AEA Next-Gen Mini-Con Outdoor Scroll · Flooded 3,980 3,820 208-230/3/60 · 3-ph 28-1/4 × 27-7/8 × 18-3/4″ 195 lb
WFON130L4AEANT Next-Gen Mini-Con Outdoor Scroll · Flooded 3,980 3,820 208-230/3/60 · 3-ph 28-1/4 × 27-7/8 × 18-3/4″ 195 lb

Manufacturer ratings at -20°F suction.

Choosing the model

Which 1 1/3 HP R-454A model fits your site

1 1/3 HP sits between the 1 HP on our standard 6x6 freezer and the 1 1/2 HP on our 6x8, and all three share one cabinet: 28 1/4 × 27 7/8 × 18 3/4 in., 195 lb. So the only thing you are choosing here is capacity: 3,820 BTU/h at 95°F and -20°F suction, 970 more than the 1 HP and 650 less than the 1 1/2 HP. It fits a small freezer whose load runs just past what 1 HP carries. The six Next-Gen Mini-Con models run on 208-230 V, single or three phase; none runs on 460 V.

  • Next-Gen Mini-Con, 6 models: cabinet 28 1/4 × 27 7/8 × 18 3/4 in., 195 lb; 3,980 BTU/h at 90°F and 3,820 BTU/h at 95°F; 208-230 V single phase and 208-230 V three phase.
  • Indoors or outdoors. WBON130L4ADA on 208-230 V single phase; WBON130L4AEA on 208-230 V three phase.
  • Outdoors only. WFON130L4ADA and WFON130L4ADANT on 208-230 V single phase; WFON130L4AEA and WFON130L4AEANT on 208-230 V three phase. The outdoor-only models are listed with a flooded condenser, for head pressure control in cold weather.
  • Other refrigerant. The same 1 1/3 HP in R-448A (4 models, Preassembled Remote) is rated 3,380 BTU/h at 95°F, 12% less at the top of the range than R-454A, and weighs 195 lb. See the 1-1/3 HP R-448A walk-in freezer system.
6 unit coolers

Evaporators used with this system

A 1-1/3 HP R-454A condensing unit is matched to 6 low-temperature unit coolers: 5 low profile and 1 center mount, rated 3,200 to 5,100 BTU/h.

Center mount, electric defrost, 208-230/1/60: 1 model
ModelBTU/hCFMFansL × W × H
WAE6E045DDA 4,500 602 1 36 × 28-3/8 × 11-1/4″
Low profile, electric defrost, 208-230/1/60: 5 models
ModelBTU/hCFMFansL × W × H
WAL4E032DDA 3,200 800 1 27-1/8 × 15-1/2 × 18-1/8″
WAL4E040DDA 4,000 785 1 27-1/8 × 15-1/2 × 18-1/8″
WAL6E042DDA 4,200 800 1 27-1/8 × 15-1/2 × 18-1/8″
WAL4E046DDA 4,600 775 1 27-1/8 × 15-1/2 × 18-1/8″
WAL6E051DDA 5,100 785 1 27-1/8 × 15-1/2 × 18-1/8″

Coil ratings use their own, smaller temperature difference, so they read higher than the condensing unit and do not compare one for one. Questions: 954-237-6753.

Straight answers

1-1/3 HP R-454A freezer system questions

How many BTU is a 1 1/3 HP R-454A walk-in freezer system?

The 6 R-454A condensing units in this class are rated 3,980 BTU/h at 90°F ambient and 3,820 BTU/h at 95°F, about 0.3 tons of refrigeration (one ton is 12,000 BTU/h; manufacturer ratings at -20°F suction). In R-448A the same horsepower is rated 3,380 BTU/h.

What size walk-in freezer does a 1 1/3 HP system fit?

No standard freezer package uses 1 1/3 HP. We pick it at quote when a small custom freezer needs about 3,800 BTU/h at 95°F and -20°F suction: more than a 1 HP gives, less than a 1 1/2 HP.

Which 1 1/3 HP R-454A condensing unit goes indoors, and which outdoors?

Indoors or outdoors: WBON130L4ADA on 208-230 V single phase; WBON130L4AEA on 208-230 V three phase. Outdoors only: WFON130L4ADA and WFON130L4ADANT on 208-230 V single phase; WFON130L4AEA and WFON130L4AEANT on 208-230 V three phase. The outdoor-only models are listed with a flooded condenser, for head pressure control in cold weather.

Is the 1 1/3 HP R-454A unit single phase, three phase or 460 V?

208-230 V single phase: WBON130L4ADA, WFON130L4ADA and WFON130L4ADANT. 208-230 V three phase: WBON130L4AEA, WFON130L4AEA and WFON130L4AEANT. No model in this class runs on 460 V.

How big and heavy is a 1 1/3 HP R-454A condensing unit?

Next-Gen Mini-Con, 6 models: cabinet 28 1/4 × 27 7/8 × 18 3/4 in., 195 lb; 3,980 BTU/h at 90°F and 3,820 BTU/h at 95°F; 208-230 V single phase and 208-230 V three phase.

Should a small walk-in freezer get 1 HP, 1 1/3 HP or 1 1/2 HP?

The heat load decides. In R-454A the three are rated 2,850, 3,820 and 4,470 BTU/h at 95°F and -20°F suction, all in the same 195 lb cabinet, so the pad and the rigging stay the same. Our standard 6x6 freezer carries 1 HP and our 6x8 carries 1 1/2 HP; 1 1/3 HP is for a load that lands between them.

Do the unit coolers change between 1 1/3 HP and 1 1/2 HP in R-454A?

Partly. Five serve both sizes. WAL4E032DDA stops here, and the 1 1/2 HP adds WAE6E054DDA, WAL4E061DDA and WAL6E058DDA.

How much capacity does this unit give up on a hotter day?

It is rated 3,980 BTU/h at 90°F and 3,820 at 95°F, so 160 BTU/h, about 4%, goes in those five degrees.

Need a 1 1/3 HP R-454A system sized for your walk-in freezer?

Send the inside dimensions and what it will store, tell us where the 1 1/3 HP unit will sit and what power the site has, and you get a drawing and a price.

Get a free quote All refrigeration units

Condensing units UL and cUL listed; unit coolers also NSF approved and AWEF certified. Listing details.

← 1-1/4 HP R-454A cooler  ·  1-1/2 HP R-454A cooler →

Call Now Get a Free Quote