1-1/3 HP R-448A walk-in freezer refrigeration system
Updated
We quote a 1 1/3 HP R-448A system when a small custom walk-in freezer needs about 3,400 BTU/h at 95°F and -20°F suction: too much for 1 HP, less than 1 1/2 HP delivers. It is on no standard package, so the heat load calculation is what selects it. This class has 4 current R-448A condensing units at 1-1/3 HP, rated 3,380 BTU/h at 95°F ambient, with the 6 unit coolers matched to that capacity, for a walk-in freezer holding 0°F to -10°F.
- Capacity. 3,520 BTU/h at 90°F ambient and 3,380 BTU/h at 95°F, about 0.3 tons of refrigeration.
- Next sizes. Smaller: 1 HP R-448A walk-in freezer system (2,580 BTU/h). Larger: 1-1/2 HP R-448A walk-in freezer system (4,030 BTU/h).
- Same horsepower in R-454A. 1-1/3 HP R-454A walk-in freezer system, 6 condensing units, 3,820 BTU/h at 95°F ambient.
1-1/3 HP R-448A condensing units
R-448A is the non-flammable A1 blend that replaces R-404A. Compare R-448A and R-454A.
| Model | Series | Siting | Compressor | BTU/h @ 90°F | BTU/h @ 95°F | Electrical | D × W × H | Weight |
|---|---|---|---|---|---|---|---|---|
| WBO130L4SDB | Preassembled Remote | Indoor / Outdoor | Scroll | 3,520 | 3,380 | 208-230 · 1-ph | 28.25 × 27.875 × 18.75″ | 195 lb |
| WBO130L4SEB | Preassembled Remote | Indoor / Outdoor | Scroll | 3,520 | 3,380 | 208-230 · 3-ph | 28.25 × 27.875 × 18.75″ | 195 lb |
| WFO130L4SDA | Preassembled Remote | Outdoor | Scroll | 3,520 | 3,380 | 208-230 · 1-ph | 28.25 × 27.875 × 18.75″ | 195 lb |
| WFO130L4SEA | Preassembled Remote | Outdoor | Scroll | 3,520 | 3,380 | 208-230 · 3-ph | 28.25 × 27.875 × 18.75″ | 195 lb |
Manufacturer ratings at -20°F suction.
Which 1 1/3 HP R-448A model fits your site
No standard freezer package carries 1 1/3 HP: our 6x6 takes 1 HP and our 6x8 takes 1 1/2 HP. This size is for the freezer whose load lands between those two. It is rated 3,380 BTU/h at 95°F, which is 800 above the 1 HP (31%) and 650 under the 1 1/2 HP (16%). Series, cabinet, weight and unit coolers stay the same across all three, so going to this size changes the capacity and leaves the pad and the rigging as they were. It gives up 140 BTU/h between 90°F and 95°F, so size a unit in a hot equipment yard on the 95°F figure.
- Preassembled Remote, 4 models: cabinet 28 1/4 × 27 7/8 × 18 3/4 in., 195 lb; 3,520 BTU/h at 90°F and 3,380 BTU/h at 95°F; 208-230 V single phase and 208-230 V three phase.
- Indoors or outdoors. WBO130L4SDB on 208-230 V single phase; WBO130L4SEB on 208-230 V three phase.
- Outdoors only. WFO130L4SDA on 208-230 V single phase; WFO130L4SEA on 208-230 V three phase.
- Other refrigerant. The same 1 1/3 HP in R-454A (6 models, Next-Gen Mini-Con) is rated 3,820 BTU/h at 95°F, 13% more at the top of the range than R-448A, and weighs 195 lb. See the 1-1/3 HP R-454A walk-in freezer system.
Evaporators used with this system
A 1-1/3 HP R-448A condensing unit is matched to 6 low-temperature unit coolers: 3 low profile, 2 ultra low profile center mount and 1 slim display case, rated 4,000 to 5,600 BTU/h.
| Model | BTU/h | CFM | Fans | L × W × H |
|---|---|---|---|---|
| WE6E037DDS | 4,300 | 602 | 1 | 32 × 28.375 × 11.25″ |
| WE6E045DDS | 5,200 | 572 | 1 | 32 × 28.375 × 11.25″ |
| Model | BTU/h | CFM | Fans | L × W × H |
|---|---|---|---|---|
| WL6E035DDAS | 4,000 | 800 | 1 | 27.125 × 15.5 × 18.125″ |
| WL6E042DDAS | 4,900 | 785 | 1 | 27.125 × 15.5 × 18.125″ |
| WL6E049DDAS | 5,600 | 775 | 1 | 27.125 × 15.5 × 18.125″ |
| Model | BTU/h | CFM | Fans | L × W × H |
|---|---|---|---|---|
| ASLE25046DDS | 5,000 | 950 | 2 | 47 × 19.8125 × 9.1875″ |
Coil ratings use their own, smaller temperature difference, so they read higher than the condensing unit and do not compare one for one. Questions: 954-237-6753.
1-1/3 HP R-448A freezer system questions
How many BTU is a 1 1/3 HP R-448A walk-in freezer system?
The 4 R-448A condensing units in this class are rated 3,520 BTU/h at 90°F ambient and 3,380 BTU/h at 95°F, about 0.3 tons of refrigeration (one ton is 12,000 BTU/h; manufacturer ratings at -20°F suction). In R-454A the same horsepower is rated 3,820 BTU/h.
What size walk-in freezer does a 1 1/3 HP system fit?
We quote a 1 1/3 HP R-448A system when a small custom walk-in freezer needs about 3,400 BTU/h at 95°F and -20°F suction: too much for 1 HP, less than 1 1/2 HP delivers. It is on no standard package, so the heat load calculation is what selects it.
Which 1 1/3 HP R-448A condensing unit goes indoors, and which outdoors?
Indoors or outdoors: WBO130L4SDB on 208-230 V single phase; WBO130L4SEB on 208-230 V three phase. Outdoors only: WFO130L4SDA on 208-230 V single phase; WFO130L4SEA on 208-230 V three phase.
Is the 1 1/3 HP R-448A unit single phase, three phase or 460 V?
208-230 V single phase: WBO130L4SDB and WFO130L4SDA. 208-230 V three phase: WBO130L4SEB and WFO130L4SEA. No model in this class runs on 460 V.
How big and heavy is a 1 1/3 HP R-448A condensing unit?
Preassembled Remote, 4 models: cabinet 28 1/4 × 27 7/8 × 18 3/4 in., 195 lb; 3,520 BTU/h at 90°F and 3,380 BTU/h at 95°F; 208-230 V single phase and 208-230 V three phase.
When does a walk-in freezer need 1 1/3 HP instead of 1 HP?
When its calculated load runs past what the 1 HP delivers at your design temperature. The R-448A 1 HP gives 2,670 BTU/h at 90°F and 2,580 at 95°F; this size gives 3,520 and 3,380. A box between our 6x6 and 6x8, frequent door openings, warm product coming in or a hot location can each push a small freezer over that line.
Does a 1 1/3 HP R-448A unit fit where a 1 HP unit sits?
On the pad, yes: both measure 28 1/4 × 27 7/8 × 18 3/4 in. and weigh 195 lb. Whether the higher capacity suits the box, the line set and the electrical service is for the heat load calculation and your refrigeration contractor to confirm.
Which unit cooler on this page moves the most air?
The slim display case ASLE25046DDS, at 950 CFM with two fans and a 5,000 BTU/h rating. Among the single fan coils the low profile WL6E035DDAS moves the most, 800 CFM, and the ultra low profile center mount WE6E045DDS the least, 572 CFM.
Need a 1 1/3 HP R-448A system sized for your walk-in freezer?
Send the inside dimensions and what it will store, tell us where the 1 1/3 HP unit will sit and what power the site has, and you get a drawing and a price.
Get a free quote All refrigeration units
Condensing units UL and cUL listed; unit coolers also NSF approved and AWEF certified. Listing details.