6 HP R-454A walk-in freezer refrigeration system
Updated
6 HP is above our standard freezer packages, the largest of which carries 2 1/2 HP on an 8x10 or 10x10. We choose it at quote when the heat load calls for about 20,800 BTU/h at 95°F: a custom size, glass doors or an outdoor location. This class has 5 current R-454A condensing units at 6 HP, rated 20,840 BTU/h at 95°F ambient, with the 27 unit coolers matched to that capacity, for a walk-in freezer holding 0°F to -10°F.
- Capacity. 21,700 BTU/h at 90°F ambient and 20,840 BTU/h at 95°F, about 1.7 tons of refrigeration.
- Next sizes. Smaller: 5 HP R-454A walk-in freezer system (17,770 BTU/h). This is the largest R-454A freezer class.
- Same horsepower in R-448A. 6 HP R-448A walk-in freezer system, 2 condensing units, 19,440 BTU/h at 95°F ambient.
6 HP R-454A condensing units
R-454A is an A2L refrigerant: lower GWP, mildly flammable, installed to the manufacturer’s A2L requirements. Compare R-448A and R-454A.
| Model | Series | Siting | Compressor | BTU/h @ 90°F | BTU/h @ 95°F | Electrical | D × W × H | Weight |
|---|---|---|---|---|---|---|---|---|
| WBON600L4AEA | Next-Gen Mini-Con | Indoor / Outdoor | Scroll · Non-Flooded | 21,700 | 20,840 | 208-230/3/60 · 3-ph | 33 × 43-7/8 × 35″ | 383 lb |
| WBON600L4AGA | Next-Gen Mini-Con | Indoor / Outdoor | Scroll · Non-Flooded | 21,700 | 20,840 | 460/3/60 · 3-ph | 33 × 43-7/8 × 35″ | 383 lb |
| WFON600L4AEA | Next-Gen Mini-Con | Outdoor | Scroll · Flooded | 21,700 | 20,840 | 208-230/3/60 · 3-ph | 33 × 43-7/8 × 35″ | 383 lb |
| WFON600L4AEANT | Next-Gen Mini-Con | Outdoor | Scroll · Flooded | 21,700 | 20,840 | 208-230/3/60 · 3-ph | 33 × 43-7/8 × 35″ | 383 lb |
| WFON600L4AGA | Next-Gen Mini-Con | Outdoor | Scroll · Flooded | 21,700 | 20,840 | 460/3/60 · 3-ph | 33 × 43-7/8 × 35″ | 383 lb |
Manufacturer ratings at -20°F suction.
Which 6 HP R-454A model fits your site
6 HP R-454A is rated up to 20,840 BTU/h at 95°F (about 1.7 tons) at -20°F suction, from 5 Next-Gen Mini-Con models. Compared with the 5 HP below it: 3,070 BTU/h more (17%), the same cabinet, 383 lb against 367 lb. It has no 208-230 V single phase model, which the 5 HP has. Of its 27 matched unit coolers, 20 also serve the 5 HP.
- Next-Gen Mini-Con, 5 models: cabinet 33 × 43 7/8 × 35 in., 383 lb; 21,700 BTU/h at 90°F and 20,840 BTU/h at 95°F; 208-230 V three phase and 460 V three phase.
- Indoors or outdoors. WBON600L4AEA on 208-230 V three phase; WBON600L4AGA on 460 V three phase.
- Outdoors only. WFON600L4AEA and WFON600L4AEANT on 208-230 V three phase; WFON600L4AGA on 460 V three phase. The outdoor-only models are listed with a flooded condenser, for head pressure control in cold weather.
- Other refrigerant. The same 6 HP in R-448A (2 models, Preassembled Remote) is rated 19,440 BTU/h at 95°F, 7% less at the top of the range than R-454A, and weighs 383 lb. See the 6 HP R-448A walk-in freezer system.
Evaporators used with this system
A 6 HP R-454A condensing unit is matched to 27 low-temperature unit coolers: 16 medium profile, 9 low profile and 2 center mount, rated 16,800 to 29,000 BTU/h.
| Model | BTU/h | CFM | Fans | L × W × H |
|---|---|---|---|---|
| WAE6E217DDA | 21,700 | 2,288 | 4 | 96 × 28-3/8 × 11-1/4″ |
| WAE6E265DDA | 26,500 | 2,860 | 5 | 116 × 28-3/8 × 11-1/4″ |
| Model | BTU/h | CFM | Fans | L × W × H |
|---|---|---|---|---|
| WAL4E170DDA | 17,000 | 3,100 | 4 | 76-5/8 × 15-1/2 × 18-1/8″ |
| WAL6E173DDA | 17,300 | 2,325 | 3 | 60-1/8 × 15-1/2 × 18-1/8″ |
| WAL4E184DDA | 18,400 | 3,925 | 5 | 93-1/8 × 15-1/2 × 18-1/8″ |
| WAL6E194DDA | 19,400 | 3,140 | 4 | 76-5/8 × 15-1/2 × 18-1/8″ |
| WAL6E218DDA | 21,800 | 3,100 | 4 | 76-5/8 × 15-1/2 × 18-1/8″ |
| WAL4E232DDA | 23,200 | 4,710 | 6 | 109-5/8 × 15-1/2 × 18-1/8″ |
| WAL6E237DDA | 23,700 | 3,925 | 5 | 93-1/8 × 15-1/2 × 18-1/8″ |
| WAL4E281DDA | 28,100 | 4,650 | 6 | 109-5/8 × 15-1/2 × 18-1/8″ |
| WAL6E290DDA | 29,000 | 4,710 | 6 | 109-5/8 × 15-1/2 × 18-1/8″ |
| Model and voltage | BTU/h | CFM | Fans | L × W × H |
|---|---|---|---|---|
| WAM4E168DDA 208-230/1/60 WAM4E168EDA 208-230/3/60 WAM4E168FDA 460/1/60 WAM4E168GDA 460/3/60 |
16,800 | 3,360 | 1 | 47-1/2 × 21-5/16 × 33-7/8″ |
| WAM6E181DDA 208-230/1/60 WAM6E181EDA 208-230/3/60 WAM6E181FDA 460/1/60 WAM6E181GDA 460/3/60 |
18,100 | 3,190 | 1 | 47-1/2 × 21-5/16 × 33-7/8″ |
| WAM6E217DDA 208-230/1/60 WAM6E217EDA 208-230/3/60 WAM6E217FDA 460/1/60 WAM6E217GDA 460/3/60 |
21,900 | 2,950 | 1 | 47-1/2 × 21-5/16 × 33-7/8″ |
| WAM4E271DDA 208-230/1/60 WAM4E271EDA 208-230/3/60 WAM4E271FDA 460/1/60 WAM4E271GDA 460/3/60 |
27,100 | 7,170 | 2 | 80-1/2 × 21-5/16 × 33-7/8″ |
Coil ratings use their own, smaller temperature difference, so they read higher than the condensing unit and do not compare one for one. Questions: 954-237-6753.
6 HP R-454A freezer system questions
How many BTU is a 6 HP R-454A walk-in freezer system?
The 5 R-454A condensing units in this class are rated 21,700 BTU/h at 90°F ambient and 20,840 BTU/h at 95°F, about 1.7 tons of refrigeration (one ton is 12,000 BTU/h; manufacturer ratings at -20°F suction). In R-448A the same horsepower is rated 19,440 BTU/h.
What size walk-in freezer does a 6 HP system fit?
6 HP is above our standard freezer packages, the largest of which carries 2 1/2 HP on an 8x10 or 10x10. We choose it at quote when the heat load calls for about 20,800 BTU/h at 95°F: a custom size, glass doors or an outdoor location. We do the heat load calculation before anything is quoted.
Which 6 HP R-454A condensing unit goes indoors, and which outdoors?
Indoors or outdoors: WBON600L4AEA on 208-230 V three phase; WBON600L4AGA on 460 V three phase. Outdoors only: WFON600L4AEA and WFON600L4AEANT on 208-230 V three phase; WFON600L4AGA on 460 V three phase. The outdoor-only models are listed with a flooded condenser, for head pressure control in cold weather.
Is the 6 HP R-454A unit single phase, three phase or 460 V?
208-230 V three phase: WBON600L4AEA, WFON600L4AEA and WFON600L4AEANT. 460 V three phase: WBON600L4AGA and WFON600L4AGA. No model in this class runs on single phase.
How big and heavy is a 6 HP R-454A condensing unit?
Next-Gen Mini-Con, 5 models: cabinet 33 × 43 7/8 × 35 in., 383 lb; 21,700 BTU/h at 90°F and 20,840 BTU/h at 95°F; 208-230 V three phase and 460 V three phase.
Does a 6 HP R-454A freezer system run on single phase?
No. All five models are three phase, on 208-230 V or 460 V. The largest R-454A freezer class with a 208-230 V single phase model is the 5 HP.
Which unit cooler is the biggest at 6 HP?
By rating, the low profile WAL6E290DDA: 29,000 BTU/h and 4,710 CFM on six fans. By airflow, the medium profile WAM4E271: 27,100 BTU/h and 7,170 CFM on two fans, offered at four voltages. The 5 HP class lists neither.
How do the R-454A and R-448A versions of 6 HP compare?
R-454A is rated 20,840 BTU/h at 95°F against 19,440, which is 1,400 more or about 7%, in a cabinet of the same size at the same 383 lb. It offers five models on 208-230 V or 460 V three phase and 27 matched coils. R-448A offers two models, on 208-230 V three phase, and 7 coils.
Need a 6 HP R-454A system sized for your walk-in freezer?
Send the inside dimensions and what it will store, tell us where the 6 HP unit will sit and what power the site has, and you get a drawing and a price.
Get a free quote All refrigeration units
Condensing units UL and cUL listed; unit coolers also NSF approved and AWEF certified. Listing details.