FREE SHIPPING on every walk-in we quote  ·  Same-day quote
R-448A · Medium Temperature (Cooler)

2 HP R-448A walk-in cooler refrigeration system

Updated

A 2 HP system is chosen at quote for a walk-in cooler that needs more than the 1 1/2 HP of our standard 10x12: a longer or taller custom box, a glass door box or a cooler standing outdoors. We run the heat load calculation before anything is quoted. This class has 4 current R-448A condensing units at 2 HP, rated 16,840 BTU/h at 95°F ambient, with the 10 unit coolers matched to that capacity, for a walk-in cooler holding 35°F.

Outdoor remote refrigeration condensing unit of the type supplied with a 2 HP walk-in cooler system
2
Horsepower
16,840
BTU/h at 95°F ambient
4
Condensing units
10
Matched evaporators
4 models

2 HP R-448A condensing units

R-448A is the non-flammable A1 blend that replaces R-404A. Compare R-448A and R-454A.

2 HP R-448A Medium Temperature (Cooler) condensing units, 4 models
ModelSeriesSiting CompressorBTU/h @ 90°F BTU/h @ 95°FElectrical D × W × HWeight
WBO200E4SDA Preassembled Remote Indoor / Outdoor Scroll 17,440 16,840 208-230 · 1-ph 28.25 × 39.875 × 21.25″ 215 lb
WBO200E4SEA Preassembled Remote Indoor / Outdoor Scroll 17,440 16,840 208-230 · 3-ph 28.25 × 39.875 × 21.25″ 215 lb
WFO200E4SDA Preassembled Remote Outdoor Scroll 17,440 16,840 208-230 · 1-ph 28.25 × 39.875 × 21.25″ 215 lb
WFO200E4SEA Preassembled Remote Outdoor Scroll 17,440 16,840 208-230 · 3-ph 28.25 × 39.875 × 21.25″ 215 lb

Manufacturer ratings at 25°F suction.

Choosing the model

Which 2 HP R-448A model fits your site

2 HP is the next step above the 1 1/2 HP that carries our largest standard cooler, the 10x12. All four R-448A models share one cabinet and one rating, so the choice comes down to two things: where the unit will sit and the power on site.

  • Preassembled Remote, 4 models: cabinet 28 1/4 × 39 7/8 × 21 1/4 in., 215 lb; 17,440 BTU/h at 90°F and 16,840 BTU/h at 95°F; 208-230 V single phase and 208-230 V three phase.
  • Indoors or outdoors. WBO200E4SDA on 208-230 V single phase; WBO200E4SEA on 208-230 V three phase.
  • Outdoors only. WFO200E4SDA on 208-230 V single phase; WFO200E4SEA on 208-230 V three phase.
  • Other refrigerant. The same 2 HP in R-454A (8 models, Next-Gen Mini-Con) is rated 16,890 BTU/h at 95°F, within 1% of R-448A (16,840 BTU/h), and weighs 215 lb. See the 2 HP R-454A walk-in cooler system.
10 unit coolers

Evaporators used with this system

A 2 HP R-448A condensing unit is matched to 10 medium-temperature unit coolers: 6 low profile, 3 ultra low profile center mount and 1 slim display case, rated 13,600 to 22,500 BTU/h.

Ultra low profile center mount, air defrost, 115 V: 3 models
ModelBTU/hCFMFansL × W × H
WE6A128ADAS 15,100 1,716 3 72 × 28.375 × 11.25″
WE6A141ADAS 16,600 2,408 4 92 × 28.375 × 11.25″
WE6A169ADAS 19,900 2,288 4 92 × 28.375 × 11.25″
Low profile, air defrost, 115 V: 6 models
ModelBTU/hCFMFansL × W × H
WL6A117ADAS 13,600 1,550 2 43.625 × 15.5 × 18.125″
WL6A130ADAS 15,300 1,550 2 43.625 × 15.5 × 18.125″
WL6A141ADAS 16,300 2,355 3 60.125 × 15.5 × 18.125″
WL6A161ADAS 18,800 2,355 3 60.125 × 15.5 × 18.125″
WL6A181ADAS 21,200 2,325 3 60.125 × 15.5 × 18.125″
WL6A195ADAS 22,500 3,140 4 76.625 × 15.5 × 18.125″
Slim display case, air defrost, 115 V: 1 model
ModelBTU/hCFMFansL × W × H
ASLA65158ADAS 17,300 2,850 6 139 × 19.8125 × 9.1875″

Coil ratings use their own temperature difference and do not compare one for one with the condensing unit. Questions: 954-237-6753.

Straight answers

2 HP R-448A cooler system questions

How many BTU is a 2 HP R-448A walk-in cooler system?

The 4 R-448A condensing units in this class are rated 17,440 BTU/h at 90°F ambient and 16,840 BTU/h at 95°F, about 1.4 tons of refrigeration (one ton is 12,000 BTU/h; manufacturer ratings at 25°F suction). In R-454A the same horsepower is rated 16,890 BTU/h.

What size walk-in cooler does a 2 HP system fit?

A 2 HP system is chosen at quote for a walk-in cooler that needs more than the 1 1/2 HP of our standard 10x12: a longer or taller custom box, a glass door box or a cooler standing outdoors. We run the heat load calculation before anything is quoted.

Which 2 HP R-448A condensing unit goes indoors, and which outdoors?

Indoors or outdoors: WBO200E4SDA on 208-230 V single phase; WBO200E4SEA on 208-230 V three phase. Outdoors only: WFO200E4SDA on 208-230 V single phase; WFO200E4SEA on 208-230 V three phase.

Is the 2 HP R-448A unit single phase, three phase or 460 V?

208-230 V single phase: WBO200E4SDA and WFO200E4SDA. 208-230 V three phase: WBO200E4SEA and WFO200E4SEA. No model in this class runs on 460 V.

How big and heavy is a 2 HP R-448A condensing unit?

Preassembled Remote, 4 models: cabinet 28 1/4 × 39 7/8 × 21 1/4 in., 215 lb; 17,440 BTU/h at 90°F and 16,840 BTU/h at 95°F; 208-230 V single phase and 208-230 V three phase.

How much does 2 HP add over a 1 1/2 HP R-448A cooler system?

It is rated 16,840 BTU/h at 95°F against 13,690, a gain of 3,150 or about 23%. The footprint stays the same, the cabinet rises from 18 3/4 in. to 21 1/4 in. and the weight goes from 210 lb to 215 lb. Seven of its ten unit coolers also serve the 1 1/2 HP; WE6A169ADAS, WL6A181ADAS and WL6A195ADAS are the new ones.

What is the largest unit cooler for a 2 HP R-448A system?

The low profile WL6A195ADAS, at 22,500 BTU/h with 3,140 CFM on four fans. All ten coils in this class use air defrost and 115 V.

Is there a display case coil for this size?

One: the slim ASLA65158ADAS, rated 17,300 BTU/h with 2,850 CFM spread across six fans.

Need a 2 HP R-448A system sized for your walk-in cooler?

Send the inside dimensions and what it will store, tell us where the 2 HP unit will sit and what power the site has, and you get a drawing and a price.

Get a free quote All refrigeration units

Condensing units UL and cUL listed; unit coolers also NSF approved and AWEF certified. Listing details.

← 1-1/2 HP R-448A freezer  ·  2-1/3 HP R-448A freezer →

Call Now Get a Free Quote