How to choose a walk-in cooler supplier
Updated
Judge a walk-in cooler supplier by what it will put in writing: the panel, the refrigeration, the drawing, the freight and the warranty. Here are ten checks, the federal minimums to hold them against, and our own answers next to each one.
Choose a walk-in cooler supplier by comparing written quotes line by line: panel R-value and construction, refrigeration sized from a heat load, a dimensioned drawing you approve before anything is built, what the freight includes, the warranty and the current lead time. A lower number that leaves out the floor, the lift gate or the refrigeration is not a lower price.
Federal rules set the floor: a walk-in needs at least R-25 walls, ceiling and doors as a cooler, R-32 as a freezer, and an R-28 floor as a freezer. Our 4 inch panels are R-29.2 on a cooler and R-34 on a freezer. Frigid Coolers designs and sells walk-ins; it does not manufacture them, and it does not install them.
Ten things to compare between suppliers
Ask every supplier the same questions and get the answers in the quote. The right column is what we quote, so you can hold us to it too.
| Check | What to ask | What we quote |
|---|---|---|
| 1. Panels | What thickness and R-value? What skin? Is there wood at the panel edge? | 4 inch, R-29.2 cooler and R-34 freezer, 26 gauge stucco-embossed Acrylume inside and out, tongue-and-groove with cam locks, no wood perimeter, NSF Listed |
| 2. Floor | Is an insulated floor included? Do I need one? | Every freezer has one. A cooler can sit on a level slab or take the insulated floor |
| 3. Door | What size, and which hardware comes with it? | 34 x 76 inch door with magnetic gasket, LED vapor-proof light, digital thermometer, key lock latch, inside safety release and automatic closer. Freezers add the door heater |
| 4. Refrigeration | What refrigerant? Sized from what? | Condensing unit and matched evaporator, R-448A or R-454A, sized from the heat load. Condensing units are UL and cUL listed |
| 5. Drawing | Do I approve a drawing before anything is built? | Yes, a dimensioned approval drawing you sign first |
| 6. Freight | Is shipping in the number? Lift gate? Residential delivery? | Free shipping on every walk-in we quote, to a commercial address. A lift gate or residential delivery only if your quote says so. Island buyers: free to their freight forwarder |
| 7. Installation | Who assembles it and who connects the refrigeration? | We do not install. Your crew or a local contractor assembles it, an electrician connects the power and a refrigeration contractor handles a remote system |
| 8. Warranty | How long, on what, and is labor covered? | 10 year panel warranty. 1 year compressor warranty, no labor, when refrigeration is quoted |
| 9. New or used | Is everything brand new? | Yes, we only quote brand new equipment |
| 10. Lead time | What is the current lead time, in writing? | It depends on the factory schedule when you order, so ask us before you commit |
Insulation minimums every walk-in must meet
A supplier should be able to give you the R-value of its panels without looking it up. These are the numbers to compare it with.
| Where | Federal minimum | Our panels |
|---|---|---|
| Cooler walls and ceiling | R-25 | R-29.2 |
| Freezer walls and ceiling | R-32 | R-34 |
| Freezer floor | R-28 | Insulated floor included on every freezer |
The minimums come from 10 CFR 431.306, which applies to walk-ins built on or after January 1, 2009, with exceptions such as the glass in a glass door and structural members. We checked that text on November 17, 2026. For food, the temperature to know is the FDA limit of 41°F; our cooler packages hold 35°F.
Warning signs in a walk-in quote
- Horsepower from floor area alone. Refrigeration should come from the heat load: box size, product going in, door openings, glass and the air around the box.
- No drawing. Without dimensions on paper, you cannot check the box against your room or the route in.
- Freight with no terms. Ask where delivery stops, who unloads and whether a lift gate is in the number.
- No R-value in writing. A panel thickness alone does not tell you what the panel insulates.
- Used equipment sold on price. Panels were cut for someone else's room, cam locks and gaskets can be damaged in teardown, and a warranty rarely transfers.
- A warranty with no detail. Ask what it covers, for how long and whether labor is included.
The walk-in cooler cost guide lists what drives the number and what a standard package includes.
Frequently asked
What should I look for when comparing walk-in cooler manufacturers?
The same things you would check with any supplier: panel thickness and R-value, what the panel skin is, whether there is wood at the panel edge, how the refrigeration is sized, whether you approve a dimensioned drawing, what the freight includes, the warranty and the current lead time. Get each answer in the written quote so two offers can be compared line by line.
Should I buy from a manufacturer or a supplier?
Either can work. What matters is who sizes the system, who draws the box, who arranges the freight and who you call about a warranty claim. Frigid Coolers designs and sells walk-ins and does not manufacture them: we size the refrigeration, send the approval drawing and quote the whole package with free shipping.
What R-value should a walk-in cooler have?
At least R-25 in the walls, ceiling and doors, by federal rule, and at least R-32 for a freezer, whose floor needs at least R-28. Our 4 inch panels are R-29.2 on a cooler and R-34 on a freezer.
How many walk-in cooler quotes should I get?
Two or three is usually enough, as long as they describe the same box: the same inside size, the same temperature, the same doors, floor and refrigeration location. Our cost guide lists what to line up, and the walk-in cooler size guide helps you settle the size first.
Does a walk-in cooler supplier need to be local?
No. Walk-in panels ship flat by freight, so the supplier can be anywhere; the people who should be near you are the crew that assembles the box, the electrician and the refrigeration contractor. We are based in Miami and have quoted in all 50 states, plus Puerto Rico and the US Virgin Islands, and we also sell across the Caribbean and South America. See how free shipping works.
What should a walk-in cooler warranty cover?
Ask for the panel term, the compressor term and whether labor is included, in writing. Ours is a 10 year panel warranty and a 1 year compressor warranty, no labor, when refrigeration is quoted, with an optional extended compressor warranty on US orders.
Also worth a look
What drives the cost
There is no single price for a walk-in, because the same footprint can be built many ways.
Read moreKit vs custom
Standard size or custom, you get the same 4 inch panels and the same build.
Read moreHow delivery works
Free shipping on every walk-in we quote, so the number you approve is the number you pay.
Read morePut us through the same ten checks
Send your room size, what you are storing and where it is going through the quote form, or text pictures to 954-237-6753. You get a real number, usually the same day, with free shipping included and an approval drawing to sign before anything is built.